12th Australia New Zealand Conference in Geomechanics, Wellington, New Zealand, p051
Author: Look B.
A case history on the design of a large cut slope for a highway project in metasedimentary rocks
Proceedings of the 11th International Association of Engineering Geologists Congress, Auckland, New Zealand, September, CD-ROM, pp 3294 – 3300
Assessment of pile driving refusal using the standard penetration test
Proceedings of the 11th International Association of Engineering Geologists Congress, Auckland, New Zealand, September, CD-ROM, pp 2641 – 2648
Effect of Coal Fouling on Ballast Maintenance
11th International Association of Engineering Geologists Congress, 11th International Association of Engineering Geologists Congress, Proceedings of the 11th International Association of Engineering Geologists Congress, Auckland, New Zealand, September, CD-ROM, pp 4261 – 4268
Landslide failure perspectives in practice in south east Queensland
Australian Geomechanics Journal, Vol 46, No. 2, pp 109 – 124
Evaluation of Subgrade Stiffness using the Dynamic Cone Penetrometer
International Conference on Advances in Geotechnical Engineering, Perth, pp 171 – 177
“Evaluation of subgrade modulus using weighted depth profiles”
International Journal of Geotechnical Engineering, Vol. 6, pp 215 – 222
Environmental Evaluation Of Landslide Remediation Options
11th Australia New Zealand Conference in Geomechanics, Melbourne, pp 314 – 319
Environmental Evaluation Of Landslide Remediation Options
11th Australia New Zealand Conference in Geomechanics, Melbourne, pp 314 – 319
Foundation considerations for buried rigid pipes on soft ground
11th Australia New Zealand Conference in Geomechanics, Melbourne, pp 142 – 147
